Extron PVS 407D Digital Switcher driver for Windows 7 - Extron PVS 407D Digital Switcher driver from Extr

Extron PVS 407D Digital Switcher 1.02

Extron PVS 407D Digital Switcher driver from Extron for OS Independent

Extron PVS 407D Digital Switcher driver from Extron for OS Independent

Publisher review for Extron PVS 407D Digital Switcher 1.02:

Before install Extron PVS 407D Digital Switcher 1.02you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron PVS 407D Digital Switcher . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron PVS 407D Digital Switcher Firmware version 1.02.Fixes:- Fixed Issue (originated in v1.01.0000-b010) – PVS 407D will attempt to load firmware to second wallplate – PVS 407D will always attempt to load the firmware to the second wallplate when power is applied. This issue has been resolved.
- Added Feature – Updated PVT wallplate firmware 1.01.0002 – PVT HDMI RGB and PVT HDMI wallplate firmware version 1.01.0002 have been included in the PVS 407D firmware.
- Improved Feature – Improved the stability of VGA input video signal – Wallplate firmware version 1.01.0002 improves the stability of VGA input video signal on the wallplate when the PVS 407D is connected to a certain display models.
- Improved Feature – Improved input channel query – The input channel query after switching has been optimized for more rapid response. Improved Feature – Improved audio mute/unmute state reporting – Firmware will report the state change for output audio mute/unmute and program audio mute/unmute to all communication ports when in verbose modes 1 and 3.
Installation steps:1. Open PVS 407D Product Configuration Software.
2. From the Tools menu, select Update Firmware. Firmware can only be updated via the front panel USB connection. If you are already connected to the device an Update Firmware dialog box opens, requesting disconnection. If you are not connected to the device, the Update Firmware submenu is not available.
3. Click OK. A separate window opens and the details of the device and current installed firmware is acquired.
4. Browse to and select the downloaded firmware file. Valid firmware files have an S19 file extension.
5. Click Open. This returns you to the Update Firmware dialog box.
6. Click Update. The progress bar shows the progress of the firmware upload to the device. After uploading is completed, the device restarts. Reconnection to the device must be made to enable live configuration.

Operating system:
OS Independent